VOC 4241AP-08

‍

APPLICATION

The TECOFI resilient seat gate valve is intended  for use in application such as: water supply and treatment, irrigation and sanitation.

Fluids : water, waste water, non-aggressive neutral liquids, etc.

Range : from DN700 to DN1200.

- Resilient seat gate valve for ON/OFF or control operation, with non-rising stem.

- PN10 flange mounting.

- Clockwise closing

- Body and bonnet assembled by screws protected by a molded sealing gasket.

- Wedge in ductile iron covered with a thick layer of elastomer.

- Ribs on the wedge outer face to facilitate its guiding in the body.

- Upstream-downstream tightness made reliable thanks to the enormous qualities of   elasticity and rigidity of the wedge.

- At the end of closing the wedge is pressed onto the flat bottom of the valve and takes perfectly its shape. This results in the absorption of impurities contained in the fluid,    such as sand, gravel, etc.  From the first moment of opening, impurities or waste are    returned to the fluid which evacuates them.

- Tightness of the upper part guarantees thanks to a system of O-rings placed next to each other and separated by small metal segments.

- Very economical use without the need for maintenance. Low pressure drop.

- Full bore at the end of opening. No retention zone.

- Good corrosion resistance (epoxy coating inside and outside the body)   fasteners protected from external aggressions by wax coat.

‍

‍