VOC 4241CM-00

‍

APPLICATION

The TECOFI resilient seat gate valve is intended  for use in application such as: water supply and treatment, irrigation and sanitation

Fluids : water, waste water, sewage water,  non-aggressive neutral liquids, etc.

‍

GENERAL CHARACTERISTICS

-Range : from DN40 to DN400.

-Resilient seat gate valve for ON/OFF or control operation, with non-rising stem.

-PN10 and PN16 flange mounting (drilling of suitable flanges from DN200).

-Body and bonnet assembled by screws protected by a molded sealing gasket.

-Wedge in ductile iron covered with a thick layer of elastomer.

-Ribs on the wedge outer face to facilitate its guiding in the body.

-Upstream-downstream tightness : at the end of closing, the wedge is pressed onto the f lat bottom of the valve and thanks to its elasticity, perfectly matches its shape.

-Sealing of the upper part guarantees thanks to a system of O-rings placed next to each other and separated by small metal segments.

-Very economical use requiring no maintenance.

-Low pressure drop.

-Full bore at the end of opening.

-Without retention zone in the low part. Good corrosion resistance (epoxy coating inside and outside the body)

-Screws protected from external aggressions by wax plug.

-Change of stem seals possible under load.

‍

‍